- Category
-
- Drawer Modules (10)
- Platform and Leg Systems (16)
- Misc Accessories (36)
Seat Box Accessories
-
![D36 inner legs]()
D36 Inner Legs
D36 Inner Legs Various lengths and foot design options Learn MoreExcl. Tax: £15.00 Incl. Tax: £18.00 -
![3 Drawer Module]()
MK19 Drawer Module 2x2, 1x3 Floor L
3 drawer Module for MK19 D36 and all D25 systems Learn MoreExcl. Tax: £70.83 Incl. Tax: £85.00 -
![Bait Table]()
XL Baitwaiter MK1819 with or without Lid Options
Configurable Product - Complete Baitwaiter and Lid £130 or Baitwaiter only £75.00Compatible with Any OCTBOX D25 or D36 built after 2012
Video Link https://www.facebook.com/1558950057730888/videos/581103459057380/
We have introduced an XL Bait waiter following lots of requests. It is designed to take 6 large (17x17cm ) bait boxes and is compatible with any seat box we have made since 2012. Can be fitted with the XL Baitwaiter lid and is also compatible with the swivel tray. Two 25mm sockets are fitted to the end of the Baitwaiter that can be utilised to fix a Topkit roost or tulip to hold the landing net in place. These can be used in conjunction either with 2 x 20cm posts or the additional bait waiter height system (D25 Systems) to secure the bait waiter across the D25 Padded seat when packed away. Extending the posts on the right hand side of the D25 supports the XL bait waiter when stored in this manner. D36 beatboxes require no additional accessories to store the Baitwaiter as they already have extending posts built into each leg. If you buy with the XL Lid it allows the Baitwaiter to be setup ready to go with bait boxes, catapults, towel etc and then packed over the seat. When you get to the peg simply lift off , rotate round and fix back on to the legs allowing you to me setup in seconds . please note Bait Boxes are displayed for illustration purposes only and are not supplied. The Baitwaiter can be purchased as a separate item or with the XL Lid (additional £55.00)
Learn MoreExcl. Tax: £62.50 Incl. Tax: £75.00 -
![Swivelling Tool Bar D25mm Adaptors & Post A10C3]()
Swivelling Tool Bar D25mm Adaptors & Post A10C3
D25 Light Alloy Tool Bar supplied with Extending Post with threaded insert. Will fit any Seat Box with 25mm round legs or posts. Length 56cm from centre to centre All alloy design is ultra light and incredibly strong and stable. Recommended Use - use as a swivelling adaptor bar to support feeder heads or pole support rollers. Use in conjunction with Mk18 feeder arm to fit two keepnets on to the left or right footplate leg of any 25mm round legs seat box Learn MoreExcl. Tax: £20.83 Incl. Tax: £25.00 -
![Octbox Umbrella]()
Octbox Umbrella
Octbox MK20 Umbrella
The Octbox umbrella has a shallow canopy with a 25 inch rib length that gives a covered area diameter of 105cm. This is about half the size of a conventional fishing Umbrella. When used in conjuction with the octbox baitwaiter lid it gives the angler sufficient protection from the wind and rain without compromising his ability to ship the pole or landing net. Casting is also made possible by the fact the umbrella only extends as far as the anglers sholuder that is furthest away from the baitwaiter.
Learn More
