Octbox Pole Roller FloorD

The Octbox roller has been designed to the only pole roller you will ever need. The main picture shows three different setups that allow the roller to be used either with or without legs to achieve any height from 16cm (6.5inches) to 120cm (4ft) in a rock solid manner. Extendable spikes have been fitted into each support leg for additional rigidity which combined with the legs that can be set at any angle allows this roller to cover options not possible with any other roller.

The Roller has two outer rollers that can be set at any angle and a middle roller that can be raised to create a double roller for those days when you need to break down the pole twice. The horizontal roller is ribbed to keep the pole in line when you ship back and is also made up of two separate rollers to support the double roller setup when needed.

Tips
On steep slopes fit the rear support legs on to the rear spikes to set them in a horizontal position while setting the fron support legs at a near vertical position. When you have achieved the perfect position and height extend the extendable spikes into the bank to fix the roller firmly in place.

Best way to set up on more level ground is to extend all four support legs to the length you require. Fit them loosely to the pole roller frame in the position you want. The legs should be splayed out along the ground at this point. Start to lift the roller, as you do so the legs provided they are loose enough should start dropping to the level of the ground below them. Once the roller is at the height you need lock off the support legs by tightening the fixing clamp bolts. Finally if you are on soft ground go round each support leg and extend its spike into the ground.

Luggage - We have developed bespoke luggage for this roller . If you wish to store a single roller we recommend our standard holdall. The XL holdall has been designed for two pole rollers