You have no items in your shopping cart.

Seat Boxes

The Octbox chassis, at the heart of all of our systems, is constructed using the most expensive materials and fabrication techniques currently available in seat box manufacture. It takes over 180 alloy welds to make an Octbox platform & height frame, and the leg clamps (used on both inner and outer legs) are housed in alloy as opposed to plastic. As such, they do not mark the legs. We guarantee that neither inner nor outer leg will slip. When you are sat on an Octbox, you can open the drawers and everything will stay in place without jamming, even when the modules are tipped upside down. There are up to 30 drawer combinations that can be attached to the height adjustment frame. All drawers and dividing trays are alloy. This ensures that their performance does not diminish if they get wet or are used in extreme temperatures.

3 Item(s)

per page
Grid  List 
  • Octbox D25

    MK19 D25 Octbox Seat Box - WAITING LIST ON THIS ITEM

      PLEASE CONTACT US TO BE ADDED TO THE LIST. NO DEPOSIT IS REQUIRED.   PLEASE BE AWARE STOCK ON THE AUGUST CONTAINER has now soldout. Your allocation if it was not registered before 20 July will be met from the container due in 1st week Sept.
    Octbox D25 MK19 Seat Box is a very versatile system that can be configured with multiple drawer setups in lightweight aluminium that can be opened without having lift your weight off the seat.  Sockets have been built into the front and rear of the seat box that allow the seat box to be converted to either a two wheel or 4 wheel barrow in under a minute.  The Octbox system is fitted with an extending tool  bar that can be fitted with posts or bump bar or keepnets as an alternative to fitting such accessories on to the footplate legs.   The advantage of fitting accessories to this extending system is you can move them further away from your feet, from just  a few Cms up to 45cm to give more room.   Moving support for the pole further out to the full extent can reduce the pressure on the elbow by up  to 30% which with the long pole can be several kgs. T
    The ultra strong chassis is fabricated from ultra light box alloy with over 230 precison welds to construct the chassis to give a system that is rock solid with no flexing and leg clamps that can support in excess of 300kg without slipping or marking the leg.
    Quick Release Footplate -  Spring loaded plunger bolts allow the footplate to be closed or extended in seconds.  The alloy mesh plate in the footplate has been replaced with a alloy plate and plastic overlay which increases the strength of the footplate. 
    Keepnet Managment System - Connectors have been added to both sides of the extending toolbar Frame that extends out of the footplate.  These combined with the stud welded to the front of the footplate and 3 x QF connectors allow the seat box to be setup with three keepnets in seconds.   Additional keepnets can added buy adding a keepnet arm  (Not supplied) to the left or right footplate legs.   If you need the keepnets higher order 3 x 20cm posts which   will allow the keepnets to be set 8 inches higher.
    Supplied as standard with:
    Octbox D25 Seatbox with Footplate & Extedning tool bar with connectors for 3 Keepnets
    Octbox D25 Height Adjustable Frame with Spirit Levels
    6 x D25 Legs with MK18 Max Grip Alloy Feet (Note Footplate legs can be either 30 to 50cm (For Level Banks & Commercials) or 50 to 90cm (River)
    2 x Drawer Alloy Drawer Module 1 x 4cm with 3 foam lined removeable alloy trays and 1 x 3cm drawer with removeable and adjustable drawer dividers
    MK19 Padded Seat and MK19 adjustab;le and removable Butt Rest
    Configuration Options
    Bait Waiter Standard or XL Baitwaiter can be added and configured with or without Lid and Swivel tray.
    Additional drawer modules can be added to increase storage and configure the storage to fully meet your requirment.
    Various wheel kits with narrow or wide wheel setups , 2 wheel, 4 wheel and even a powered 4 wheel option
    Packed System
    We build most of the D25 seatbox less accessories by ftting the middle and rear legs through the footplate rails and height frame.  The footplate is fitted and we also fit all of the bolts.   The Drawer module is fitted with the padded seat and just needs to be clipped to the height adjustable frame.   You will need to fit the footplate legs, Inner legs for the middle and rear and the extension frame.  This should only take a matter of minutes. 

    Learn More
    Excl. Tax: £395.83 Incl. Tax: £475.00 As low as: £400.00

  • Octbox MK19 D36 Seat Box

    Octbox MK19 D36 Seat Box

    The D36 system is a heavier duty version of the Octbox D25.   The thicker 36mm diameter legs give much more stability when the box is raised to heights over 2ft (60cm) than the D36.  When used with accesories such as the D36 outrigger it is possible to place the front end up to 6ft (180cm) and the rear up to 3ft (90cm).  25mm extendable posts are fitted into each leg allowing all D25 accessories to also fit this system with the added advantage their height can be raised higher than the length of the leg.  This allows the angler to refine his setup even more.  

    Configuration    It is possible to configure your D36 Seat Box to meet exactly what you need by selecting the numerous options in the drrop down menus.  Information on each option is as follows
    SEAT BOX OPTION - RIVER  Configured for anglers that fish mainly venues with difficult uneven banks. The footplate legs extend up to 3ft (90cm).
                                        COMMERCIAL (Com)  Configured for anglers that fish mainly venues with fairly level banks. The footplate legs extend up to 1ft 8"( 55cm).   
    Baitwaiter Accessory Pack - Available with or without a baitwaiter.  
    Keepnet Adaptor Set - 3 x QF adaptors to fit to keepnets with one QF stud fixed to the front centre of the footplate and two adjustable adaptors fitted to the extending adaptor bar
    Footplate with Extending Adaptor Bar -   Ultra strong and light this bar can be used in a number of different ways.  The distance from the footplate legs is variable and at full extension acts as an addiutional load area when in barrow mode as well as a rock solid support for a bump / spray bar.  It can support even the heaviest poles in excess of 18m with only 5mm of movement.  Supporting long poles upto 50cm further out that conventional pole support systems reduces the pressure on the elbow by around 30% and makes controlling long poles in gusty conditions much easier.  The underside of the footplate has been fitted with guide blocks that ensure the footplate extends smoothly and stops in the correct position for the spring loaded fixing bolts to engage.  
     Height Adjustable Frame -  The drawer setup can be moved up and down to achieve the perfect seating position before being locked inplace by four stainless steel headless allen key bolts using the allen key.   The frame also locks the middle in rear legs in conjunction with the main platform ensuring there is not a single mm of lateral movment on the heavy duty 36mm legs.  The rear of the frame has two 25mm posts that can be used to dock the baitwaiter or fix accessories such as a brolley or topkit set. 
    Leg Systems - The D36 is designed to replace the need for a platform and has been proven to be more stable than any platformdue to the legs being fixed in two points with powerful adaptors that can each individually take 285kg without slipping.   This combined with leg systems that can be fitted to the front that can go in excess of 6ft and legs for the rear that go to 90cm with options  for mud or high grip allow this system to get you setup in the most effective manner possible.  In certains circumstances this can be a massive advantage and the main reason for choosing the heavier duty D36 over the lighter D25.
    Weight -  The D36 with Baitwaiter system removed weighs 17.5kg which is still lighter than most other systems on the market supplied by the top ten brands.  
    Other accessories that you may wish to consider for the D36 is the Outrigger system which converts the system into a heavy duty incredibly stable platform with leg systems that can extend well over 6ft.   
    Learn More
    Excl. Tax: £662.50 Incl. Tax: £795.00 As low as: £710.00

  • Powered Fishing Barrow

    D25 Two Drawer Seat Box & Lithium Powered Wheel Kit Waiting List Please Call before Ordering

    NOVEMBER UPDATE - Following feedback we have upgraded the axle support to increase the strength and reduce pressure on the axle. We would like to thank everyone who helped with the development of this enhancement.  Picture one shows how the axle now look with the upgrade.   We are in the process of recalling all systems supplied without this upgrade

    Detailed Spec

    Lithium Powered 4 Wheeled High Torque Tackle Barrow with Lithium 16AH 12V Battery. 

    Octbox D25 MK18 Seat Box with Two drawers  (weight approx 13kg)  Additional Extras that can be added

    Lithium Powered Electric Wheel Kit Designed to converts either the  Seat box into a Lithium Powered 4 wheeled Barrow in approx 1 minute. Consists of a front and rear module. The Rear module fits two height adjustable handles and wheels into the rear of the Octbox while the front module fits a motorised wheel kit into the front of the beatbox footplate. Takes approx one minute to convert the seat box into the 4 wheeled electric barrow which is demonstrated in the MK19 Electric Barrow Video The MK19 powered unit is totally bespoke and uses no parts from the Golf industry. The 60:1 gear ratio gives a huge amount of torque which when combined with the large high grip wheels ensures the barrow can handle any load the angler wishes to move with ease. A high ground clearance also ensures the system will not be grounded on rough ground.  

    Octbox D25 MK18 Seat Box with Two drawers.  Ultralight welded Alloy Chassis is rock solid and capable of supporting weights with the legs extended in excess of 1500kg.   Test videos of the leg tests at the Cambridge University test lab can be viewed on you tube.  Despite the immense strength this is still one of the lightest seat boxes with a footplate on the market.  It is even lighter than the ultra expensive Preston Carbon Seat Box.

    The short facebook clip demos its performance in heavy mud. Copy it into your browser if you are logged into facebook to review. Learn More
    Excl. Tax: £912.50 Incl. Tax: £1,095.00

3 Item(s)

per page
Grid  List 
Back to Top