Octbox D25 Anniversary Limited Edition Seatbox

Description

JULY OFFER – Supplied with free two or single wheel kit.
Octbox D25 Anniversary edition Seat Box is a very versatile system that can be configured in numerous ways. The all aluminium design and non plastic leg clamps means you do not need to worry about summer heat warping either the box or drawers.
The system is supplied with the latest Anniversary Footplate, Height frame and legs.
The drawers in lightweight aluminium that can be opened without having lift your weight off the seat. Sockets have been built into the front and rear of the seat box that can be fitted with wheels and handles to convert the box to a tackle barrow. The Octbox system is also fitted with an extending tool bar that can be fitted with posts or bump bar or keepnets as an alternative to fitting such accessories on to the footplate legs. The advantage of fitting accessories to this extending system is you can move them further away from your feet, from just a few Cms up to 45cm to give more room. Moving support for the pole further out to the full extent can reduce the pressure on the elbow by up to 30% which with the long pole can be several kgs. T
The ultra strong chassis is fabricated from ultra light box alloy with over 230 precison welds to construct the chassis to give a system that is rock solid with no flexing and leg clamps that can support in excess of 300kg without slipping or marking the leg.
Quick Release Footplate – Spring loaded plunger bolts allow the footplate to be closed or extended in seconds. The alloy mesh plate in the footplate has been replaced with a alloy plate and plastic overlay which increases the strength of the footplate.
Keepnet Managment System – Connectors have been added to both sides of the extending toolbar Frame that extends out of the footplate. These combined with the stud welded to the front of the footplate and 2 x QF connectors allow the seat box to be setup with 2 keepnets in seconds. Additional keepnets can added buy adding either a toolbar or an additional QF adaptor (Not supplied) . If you need the keepnets higher 20cm kepnet extension posts are available to buy which will allow the keepnets to be set 8 inches higher.
Supplied as standard with:
Octbox with D25 Anniversary Edition Footplate & Extending tool bar with connectors for 2 Keepnets
Octbox D25 (Anniversary Edition) Height Adjustable Frame with Spirit Levels
6 x D25 Legs with MK18 Max Grip Alloy Feet (Note Footplate legs can be either 30 to 50cm (For Level Banks & Commercials) or 50 to 90cm (River)
3 x Drawer Alloy (Anniversary Edition) Drawer Module or 4 x Drawer Alloy (Anniversary Edition) Drawer Module The three drawer is fitted with 1 x 7cm with 8 tray storage system, 1 x 3cm and 1 x 2cm drawers supplied with dividers. The 4 drawer system is supplied with 1x4cm 2 x 3cm and 1 x 2cm alloy drawers
Anniversary Edition Padded Seat fitted with Leatherette socket. The latest seat has much more padding than our standard edition seat.